This sounds like an unstable soldering point, which cracked after assembling.
Try to look, if the case is pressing on the pcb somewehere and try to resolder all points, you soldered before. I hope it helps!
The macro option is included in Brendans last firmware update (v0.37):
See number 22 (Expanded Performance Menu) in the his feature list:
There is a global settiing! I think it is called "setting" in the save menu. But I fear that midi notes are not included, because they belong to the patch.
I switched to the type "all" completely and save everything in this format, which works for m…
Do you know this website:
Here you can find a lot of free samples.
Just be shure that the samples are in mono before putting it on the SD card.
And mind the overall size limit for all samples (~490kb).
Reheating of the solder points belonging to the second row of the display should do the job.
Make shure that all solder flux is gone and that there is a visible connection between the pin of the display and the solder pad of the LXR.
Wish you the be…
Congratulation and welcome to the family!
You could check your setting for midi filtering:
Be sure that "R" is set for receiving midi clock.
Your second problem sounds weird.…
I checked your last update and pattern chaining works fine now!
Also the record function by holding the rec button works great.
But I have some suggestions:
- When you use transpose and record the sequence into the sequencer it is hard …
yes, pattern chaining stops working for me with your new version. I had a simple chain of two patterns, but only the first one was played. After downgrading to your last firmware everything was fine again.
I just noticed, that transpos…
I just finished a new project using manual pattern switching per midi program change for the first time and it absolutely rocks.
Together with the mute option for individual voices it allows one to create nice build-ups.
Thank you for this great op…
Thanks Brendan for this fantastic update!
2 - I think, I tried both ways and got the same results. will try again! perhaps, anyone else could confirm?
I can confitm, that something is strange here. I had some patterns with different notes and every…
I am sorry to hear that and I can understand your frustration.
But please have in mind that SP is a one-man company and that Julian has become a father not long ago.
I hope you can contact him somehow and wish you all the best!